News

Based on the characteristics of the various extension spring materials previously discussed, 65Mn carbon spring steel is currently the most widely ...

Carbon content of 0.6%–0.9%; offers good elasticity and strength, low cost, and excellent workability.

They are helical springs designed to withstand axial tensile force. Typically wound from material with a circular cross-section, the coils are tigh...

Preparations to Prevent Damage Before Installation

Gather needle-nose pliers, a dedicated spring hook tool, a wrench, a screwdriver, and positioning pins; use calipers or a ruler to measure dimensio...

Material strength, fatigue resistance, and corrosion resistance directly determine the baseline lifespan; inferior materials are prone to premature...

Confirm that the spring specifications and rated load fully match the equipment design requirements; inspect the spring for quality defects such as...

Keep the operating load within 70% of the rated value and the compression amount under 45% of the free height to prevent permanent deformation caus...

They can be manufactured in various shapes—such as cylindrical, conical, convex, or concave—allowing for flexible adaptation to different installat...

Compression springs are helical springs designed to withstand axial compressive loads; their key structural characteristics are as follows:

The most common failure mode; caused by prolonged exposure to repeated dynamic loads, where internal micro-cracks gradually propagate until fractur...

Compression springs (also known as pressure springs) are a type of helical spring designed to withstand axial compressive loads.